Replacing Siding On A Historic Home

Unfortunately, if you have a historic, aged home that needs some repairs or replacements to the exterior siding, the lumber available in today’s hardware stores is not as strong, dense, and solid as it used to be. Wood is cut while the trees are very young nowadays, relative to years back when only mature trees were harvested. This same concept also applies to the latex paint that we use now on the exteriors of our home, compared to the lead paint that was used back in the day and lasted a long time.


When these two problems of weakened wood and low-quality paint are combined, it creates a home repair mess fairly quickly. If you happen to own a historic, Victorian-era home, the siding is more than likely made out of a product known as #105 weatherboard.

In most cases, a simple fix can be applied to take care of any issues causing your siding to be needing replaced, such as installing a gutter system or an eaves-trough. On a modern home, in a recent neighborhood, this normally isn’t an issue. In some instances, however, with historic homes, you may be located in a “National Historic District”, which means your home is subject to rules and regulations that a more modern home may not be subjected to. This can cause you to have to take matters into your own hands to find a solution for replacing or repairing your siding.


The main issue that will arise with siding on a historic home is the wood and paint will start warping and cracking, which creates small gaps in the wood and siding, which in turn allow moisture and humidity to seep through. This moisture leaking into the cracks of the wood siding can be extremely harmful, and potentially can cause problems for your family, if the moisture in turn begins to cause mold and mildew to build up in the foundation of your home.

It’s important that if you decide to go through with replacing exterior siding on your home, that you either use a siding replacement company such as Blue Ridge Exteriors, or truly research and plan out your steps before attempting a do-it-yourself project. For more information on milling the necessary lumber for replacing #105 weatherboard, which is rare to find in stores nowadays, check out this extremely helpful article.